|
home » product ranges » designer » other finishes »
An unrivalled selection of door facing materials
Freedom of choice is fundamental to the Designer Range and the widest possible variety of materials, colours and finishes is offered.
Laminates, PVC, paint and metal finishes give designers
scope to tailor doorsets to meet their particular design visions,
in the knowledge that we shall ensure that performance and
practical requirements are met.
Laminated and PVC facing
Both laminate and PVC facings are available from the
Designer Range to give increased impact resistance. While
laminates have a surface colour and slightly textured finish,
PVC has a through colour and smooth finish, or fully textured
for high impact resistance. The specifier has complete
freedom of choice from facing manufacturers’ ranges.
Postformed laminate or PVC faced doors are fully illustrated
within our Plasform brochure. |
 |
 |
 |
|
Metal facings
Sheet metal can be bonded to the door construction during
the manufacturing process. The facing options include
mild, patterned and brushed stainless, or galvanised steel.
Patterned steel facings can also be applied in the form of
trays to fully encapsulate the door. Steel facings can be left
clean, primed, powder coated or stove enamelled, with the
exception of patterned stainless steel which is self-finished.
Steel frames can be supplied finished to complement door
facings.
With the exception of doors fitted with trays all doors have
exposed hardwood lippings to both vertical edges softened
with a 3mm radius, or to all 4 edges if required with square
edged top and bottom. |
Paint finishes
Designer Range doorsets can be finished with Velvalux
Opaque, a factory applied pigmented polyurethane paint
available in any colour within RAL or British Standard ranges,
for which colour matched PVC pellets are supplied to
conceal frame fixings. We can provide samples for selection
and production control purposes, or the specifier can supply
material for colour matching.
|
|
|
